How to install the Rx insert of sports sunglasses and clean prescription lenses?

How to Install The Rx Insert

Prepare Your Workspace: Lay a soft microfiber cloth on a flat table to prevent sliding/scratches during installation.

Step-by-Step Instructions:

1. Locate the Insert Slots:
   Identify the grooves inside the sunglasses.
2. Align the Insert:
   Match the insert with the grooves inside the sunglasses.
3. Secure the Insert:
   Press the insert into place until you hear a click or you find its clip has been vertical to the bridge. If necessary, press firmly on the insert with your thumbs while stretching the sunglasses temples for large space during installation. Don’t hesitate – our polycarbonate lens is shatterproof and can withstand pressure.
4. Check Stability:
   Shake the sunglasses lightly - the insert shouldn’t rattle.

How to Clean The Rx Lenses

1. Locate the retaining clips positioned along the edge of the frame.
2. Gently press outward on the upper clips with your thumbs until they disengage from the frame.
3. Carefully lift the sunglasses lens out of the main frame and set it aside on a clean, soft surface.
4. Hold the insert securely at the connection point with one hand, and gently wipe the Rx lenses using a clean, lint-free microfiber cloth. Use light, circular motions to remove smudges and dust without applying excessive pressure.
5. Once cleaned, reinstall the sunglasses lens by aligning it with the grooves and pressing it back into the frame until it clicks securely into place. Ensure the lens is fully seated and evenly positioned on both sides. Be careful not to touch the Rx insert lenses during installation to avoid leaving fingerprints or smudges.

For detailed installation/cleaning instructions, please refer to the video below.
(The product shown in the video is TOM- Prescription Sports Sunglasses for Kids.)